Modeling Tips

QuickTips • Modeling Tips

Expert tips to facilitate model building.

Quick Adding of Blocks
Quick Adding of BlocksTo add a block in parallel, right-click on a block's input or output connector. The popup menu shows common blocks that typically precede or follow the given block plus quick access to the library from which you should choose a block.
Insert a Block Between Connected Blocks
Insert BlockMove the two blocks apart to provide room for the new block. Then right-click on the output connector of the first block and choose the block to insert.
Comparing Results for a Model
Model CompareExtendSim includes an automated test environment for model verification and testing. For example, you might want to make a change to a saved model and run it before saving again to see if the results changed.

To do this:
   Run and Save the model.
   Then make your changes.
   Place the Model Compare block from the Utilities library in the model. Open its dialog and click the Run and Compare button

The results will be displayed in the Model Compare block’s dialog.

To save these changes, you must first delete the Model Compare block, then Save the model. Simply closing the model will discard your changes along with the Model Compare block.
Link alerts
Live update messages, called Link Alerts, are sent between ExtendSim blocks and the ExtendSim databases or global arrays they are dynamically linked to. This means that as soon as the data at the source changes, an alert will be dynamically sent to all the blocks linked to that location, and those target blocks can take actions to react to the new value.

For example, if you write to a location in an ExtendSim database, ExtendSim will send update messages to all the Read blocks in the model linked to that location. When the Read block receives the alert message, it will act on the fact that the data value changed. Writing to a cell in an Excel spreadsheet or to a text file will not have the same live link effect. Be careful though, Link Alerts can significantly slow simulation speed if enabled during the simulation run.

For the most part, Link Alerts make the blocks that have implemented them work as expected—when data changes, the blocks will respond appropriately. However, due to all the opportunities for response, Link Alerts are an especially powerful tool when using equation-based blocks or creating custom blocks. If you are developing a block that needs to respond to changes in data (ExtendSim database or global or dynamic arrays) or you are creating sophisticated equations that need this, or you need to use the Link Alert block, see the ExtendSim Technical Reference to understand more about how Link Alerts work.
Sending a Model to Someone Else
If you send your model to someone else to run, don’t forget to include all necessary files. Your model might not include all the files in this list, but if it does, then you will need to include it. The list includes the following:
   Custom libraries (not the standard libraries which are installed with ExtendSim but your custom libraries)
   All include files used in Equation blocks or custom blocks
   Pictures used as item animation
   External data files the model is importing from or exporting to (like Excel files)
Making a Backup of Your Model
Make a backup of your model from time to time. This is useful if you want to go back and open a previous model version. In order to do that, periodically make a complete backup of your model and any additional files it might need. You might not be able to run an old model if you don’t. The complete archived model should include the same elements you would need to include if you sent the model to someone else to run. Every model might not have all of these elements, but if they do, store them with that current version of the model. The list is as follows:
   Custom libraries (not the standard libraries which are installed with ExtendSim but your custom libraries)
   Include files used in Equation blocks or Custom blocks
   Pictures used as item animation
   External data files you are importing from or exporting to (like Excel files)

Consider one simple example of why you would want to archive files along with the model itself. Suppose you have an Excel workbook that is used to import data from the beginning of the run and export data from the end of the run. Let's say we have one tab for all the inputs and one tab for all the outputs. We made a backup of the model yesterday, but we did not back up anything other than the model. Today, we began working on the data and made some significant changes to the Excel workbook. If we wanted to open up yesterday's model and run it with the updated spreadsheet, the old model wouldn't understand what to do with this updated Excel file. There is a mismatch. We would be able to open the model up in this case, but we couldn't run the model.

The same concept applies to all the other files listed above. If we don't include them in the model backup, when we go and open up the backup model it may or may not work properly if there have been changes to the library files, include files, pictures, or data files. These files can change over time as you enhance your model so it would be a great idea to keep a copy of these files with the model backup.

You could use WinZip to make a complete backup of all the required files, but other tools could be used as well. If you are working with a group of model developers and everyone is working on the same model, something more advanced should be used which allows each user to check in changes on each individual file. Source control tools can be used here, but you would not be able to see the differences between versions like you would with raw source code. The source control tools work well for keeping track of changes if the users document changes appropriately. Another good tool for managing ExtendSim projects with multiple developers is Basecamp.