Getting to Know ExtendSim

hdr gettoknowNow that you're comfortable using ExtendSim, let's get a little more in-depth into the advanced features in ExtendSim.

In the following SimCasts, simulation experts and the Imagine That Inc. technical staff teamed up to divulge simulation techniques, discuss general research, and examine specific ExtendSim features. Through these webinars, you can learn tips and techniques that will help you achieve the maximum possible benefit from applying ExtendSim tools to your simulation projects.

Each of these videos are in-depth presentations that range in time from 30 minutes to 2 hours depending on the concepts discussed. All were either past monthly webinars or ExtendSim Master Classes.

Learning CenterTo learn more about ExtendSim, in addition to these videos, you might also want to visit the ExtendSim Vimeo Channel.

Play VideoEquation Block Basics
Presented by Robin Clark of QMT Group • video length 17:34

Introduction to the ExtendSim Equation blocks. If you're not familiar with Equation blocks, it is highly recommended to view this video. It will acquaint you with the blocks and prepare you to watch the more advanced webinar "Creating Compiled Logical Statements in Equation Blocks".

Play VideoUsing the Reliability Module for Stand-Alone or Integrated RBDs
Presented by Robin Clark of QMT Group • video length 1:04:17

Dig into the new Reliability module and come out with a sound understanding of its fundamental concepts, including:

• Basic Concepts and Definitions of Reliability

• Creating Distributions and Event Cycles

• Creating Reliability Block Diagrams

• Using RBD in Discrete Event or Discrete Rate Models

• Setting up Wear and Shifts in RBDs

Play VideoGetting the Most Out of the ExtendSim Report Library
Presented by Robin Clark of QMT Group • video length 1:23:36

Meet the new Reports library in ExtendSim 10! Learn how to set up and use each block in the Report library.

• Cost Stats -- reports statistics for blocks that have costing enabled. Learn how to set up the costs in a model and how costs get reported.

• DB Statistics -- calculates the statistics for a selected field in a table.

• Item Log Manager -- collects information about how item states change over time for a customizable database report.

• Reports Manager -- is the primary interface for creating reports of blocks and events.

• Statistics -- reports statistics on certain types of blocks.

Play VideoTransitioning to ExtendSim 10
Presented by Robin Clark of QMT Group • video length 29:33

Make a smooth transition to ExtendSim 10. Learn the primary differences you should be aware of as you transition from ExtendSim 9 to ExtendSim 10.

Check out the document Upgrade Reference for ExtendSim 10. Plus watch the Transitioning to ExtendSim 10 video. Primary topics include:

• ExtendSim 10 product line & license types

• Installing, launching, and activating ExtendSim 10

• Dockable toolbars, tear off menus, and notebook windows

• Adding and connecting blocks plus connection lines

• Fastest vs multi-threaded run modes

• Introduction to the Chart library

• Introduction to the Report library

• Announcing the Reliability module

• Transitioning existing ExtendSim models to ExtendSim 10

• Transitioning custom ExtendSim blocks to ExtendSim 10

• 64-bit app

• Quick Start Guides, Tutorial & Reference guides, and videos

• And more…

Play VideoManaging Hierarchical Blocks
Presented by Dave Krahl from Kromite LLC while he was a Technology Evangelist at Imagine That Inc. • video length 56:24

One of ExtendSim's most powerful and often used features is hierarchy. Learn about:

• Creating and modifying hierarchical blocks
• Adding and removing connectors
• Creating a user interface
• Animation
• Libraries
• Managing unique data

Play VideoHierarchical Block Animation
Presented by Robin Clark of QMT Group • video length 39:13

Play VideoDatabase Random Distributions
Presented by H. Lynn Scheurman of James Dailey & Associates LLC • video length 1:13:08

Play VideoOptimization in ExtendSim
Presented by Robin Clark of QMT Group • video length 1:08:35

Optimization and simulation are two different tools used to solve different questions. However, there are times where the best approach would be to combine the two tools to solve different aspects of the same problem. ExtendSim gives a developer the power they need to use both in one tool.

Given that we are in the simulation community, we all know what discrete event simulation is. However many of us have misconceptions about what we mean when discussing optimization. This talk discusses in general terms some of the different optimization techniques and shows examples in ExtendSim.

It begins with a discussion about the Optimizer block in the Value library which uses a goal seeking approach. Learn how it works and what types of problems it works best on.

Then the discussion moves on to Linear Programming and Mixed Integer Programming. ExtendSim includes a Mixed Integer Linear Programming (MILP) solver and uses that technology in the Rate module. Using the development environment, we can also use the MILP solver in our own models during the simulation. After watching this, you will have a better understanding of optimization as well as when and how to incorporate it in your own models when the need arises.

Play VideoThe Ins and Outs of ExtendSim Messaging
Presented by Dave Krahl from Kromite LLC while he was a Technology Evangelist at Imagine That Inc. • video length 54:35

ExtendSim uses a sophisticated messaging architecture to signal blocks into action. While messages can originate either from the ExtendSim application or from individual blocks, it is always a block that is on the receiving end of a message. Different types of messages result in the receiving block doing different types of things.

Play VideoIntroduction to Discrete Event Simulation
Presented by Edward J. Williams, Senior Technical Specialist at Production Modeling Corporation • video length 53:33

Edward J. Williams introduces discrete-event process simulation -- its concepts, usage, and importance in this SimCast. After watching this video, you will come to understand what discrete-event simulation is, how it can improve operations and fatten the bottom line, when to use it, and the fundamental steps of using it to maximum benefit. Additionally, you'll know what the next steps to take will be to begin enjoying the fruits of this powerful analytic technology.

Play VideoTools for Troubleshooting
Presented by Dave Krahl from Kromite LLC while he was a Technology Evangelist at Imagine That Inc. • video length 58:08

Find the difference between what you want and what the model is actually doing. ExtendSim 9 blocks, the debugger, developing your own debugging methods, and other troubleshooting tools are all covered in this SimCast.

Play VideoConOps Modeling Using ExtendSim
Presented by Bryan Sydnor, Grad Student, Master of Science in Operations Research & Applied Statistics at California State University at Long Beach • video length 55:21

Concept of Operations (ConOps) modeling methods and applications within ExtendSim are discussed in this SimCast. Topics covered include:

• An overview of the types of ConOps modeling -- The objective in ConOps modeling is to measure the amount of equipment, spares, and/or fuel that might be needed to ensure a minimum amount of downtime. ConOps is also used to maximize the amount of processed material, packages, and/or searched area.

• The use of Excel to drive ExtendSim model behavior -- The interconnect between ExtendSim and Excel provides the model architect with the ability to leverage the strengths of both tools. Learn how to solicit inputs and execute a model effectively even with vastly changing data sets.

• Methods and applications of the Query Equation blocks -- Query Equation blocks offer a unique set of tools. Use these blocks and the ExtendSim database to control and change the state of the model.

• Model control and measurement -- Queue Equation and Gate blocks can be used throughout a model to control items that represent different elements within the ConOps model. Adding blocks from the Rate library is a unique method of measuring continuous-rate resources such as fuel and power.

Play VideoDiscrete Event Simulation Using ExtendSim: Output Analysis
Presented by Dr. Jeffrey S. Strickland, PhD, CMSP, ASEP, President of Simulation Educators • video length 57:05

Problems encountered when analyzing simulation output that are modeled with queuing processes occur frequently. Two of the problems that typically occur are:

• The Initial Transient Period
• Autocorrelated Observations

Simulations take time to warm up to their steady state behavior, unless something is known about it when modeling a system. This warm up period or initial transient period must be accounted for in experimental design. Waiting times are not independent--they are autocorrelated--and these must also be dealt with in experimental design. It is easy to pick these problems apart by running a simple M/M/1 queue model. Learn more by watching this SimCast.

Other Tips for Your Simulation Projects

Play VideoJMP Visualization Showcase
Presented by Scott Wise, JMP Principal Systems Engineer at SAS Institute, Inc. • video length 1:00:04

Learn how JMP® Exploratory Analytic Software can help bring out the story in your simulation results. Instead of relying only on spreadsheets for analysis, JMP saves you time by creating compelling visualizations that allow you to interact with the data and find the real drivers of performance. And it's simple to export data from ExtendSim. Just use the direct link to JMP from the ExtendSim Scenario Manager block.

Then it is easy to further analytically describe, compare, and predict with your simulated data using JMP's strong tool box, including design of experiments (DOE). This one-hour webinar features a real case study showing how JMP visualization can work in your simulation flow to save analysis time and take your results even further!

Play VideoSatellite Orbiting and Communication Modeling
Presented by Doug Shannon, Sr SE/M&S, TASC/GreenDart Inc. & Richard Marymee, Lead Systems Engineer, GreenDart Inc. • video length 57:22

This SimCast looks at an orbital model, data communication model, and a detailed ground processing model. It examines polar orbiting weather satellites, stored sensor data, communication links to global receptors, and sensor data retrieval in ExtendSim models. The data retrieval model includes lost data and data recovery due to a rain attenuation model. The ground model is a process flow of sensor data executing simulated weather algorithms on shared data processors.

Play VideoSoft Skills and Simulation: Lessons learned in using soft skills to avoid disaster and enhance your simulation project
Presented by Jack Kloeber, Jr, PhD, Customized Decision Support at Kromite LLC • video length 1:03:18

"Ever since 1986 when I took my first graduate class in Discrete Event Simulation in SLAM (using Fortran IV as the underlying language), I have understood the tremendous power of simulation. I have been using simulation as one of my more dependable problem solving tools ever since. While many of my internal or external clients in the Army, Dept of Energy, Air Force, Pharmaceutical Companies, and Agriculture Companies have seen its power, some have not. I look back now over 37 years and blame any failures on:

• lack of communicating the process
• focusing on my "cool programming"
• paying too little attention to simplicity vs realism tradeoffs
• not having frequent enough inprogress demonstrations
• inattention to the user's ability and eventual use of the model
• not getting the company's objectives right

The causes for failure were NOT bad mathematics, poor code, wrong methodology, or even wrong simulation package. This talk is about the soft factors, and the soft skills needed to ensure that your simulation project succeeds."

Play VideoInside Discrete-Event Simulation Software: How It Works and Why It Matters
Presented by Dr. Thomas J. Schriber, Professor of Business Information Technology at the University of Michigan • video length 2:02:35

Simulation practitioners and consumers can gain a grounding in how discrete-event simulation software works by viewing this SimCast. This Master Class follows Dr. Thomas J. Schriber and co-author Daniel T. Brunner's well-known paper "Inside Discrete-Event Simulation Software: How It Works and Why It Matters" which has been designated as one of ten Landmark Papers given in the first forty years of the Winter Simulation Conference. Topics include:

• Discrete-event systems
• Entities
• Resources
• Control elements and Operations
• Simulation runs
• Entity states
• Entity lists
• Entity list management

The SimCast concludes with several examples of "why it matters" to give modelers a better understanding of how their simulation software works. To get more out of this Master Class, we recommend you review Dr. Scriber's 2011 Winter Simulation Conference paper prior to viewing the SimCast. To get even further in-depth, Jerry Banks, Daniel T. Brunner, et al’s Handbook of Simulation (ISBN 0471134031) contains an extended version of this paper.

Play VideoGetting to the Right Decision
Presented by Scott J. Bury, Principal Research Scientist Engineering & Process Sciences at The Dow Chemical Company• video length 31:44

Get set up for success as a Problem-Solver and help earn repeat business from your clients. This SimCast provides a framework for Modeling and Simulation projects that will show you the benefits of Front-End Contracting, good project management, and even when you shouldn't simulate.

Play VideoChoosing the Best System
Presented by Professor Dave Goldsman PhD, Georgia Institute of Technology • video length 54:16

Experimenters are often interested in the problem of choosing the best from among a group of competing systems or alternatives. For instance:

• Which of three anti-cancer drugs has the highest cure rate?
• Which of five soft drink brands is the most preferred?
• Which of ten possible portfolios will yield the highest expected financial gain?

Such questions are also of interest to those working on simulation-based problems. For example:

• Which of three supply chain configurations will give our company the highest profit?
• Which of several production policies will maximize the probability that our orders will go out on time?

A number of ways to address problems such as these are discussed in this SimCast. Classical statistical methods are considered as well as more-modern ranking-and-selection techniques and even some stochastic optimization solution strategies. The talk is in the form of a survey. No sophisticated mathematical background is needed.

Play VideoDesign of Experiments for Simulation Modeling
Presented by Dr. Averill M. Law, President of Averill M. Law & Associates • video length 1:33:20

Simulation models often have many input factors and determining which ones are really important can be quite difficult. This SimCast provides a brief introduction to design of experiments for simulation modeling.

Play VideoIntegrating ExtendSim with the Bayesian Network software package Netica
Presented by David P. Brown, Senior Principal Analyst at Innovative Decisions, Inc. • vieo length 1:03:57

Dr. David P. Brown discusses how his company integrated ExtendSim with the Bayesian Network software package Netica (by Norsys Software). Integration of simulation with Bayesian belief network software offers several expanded capabilities for both ExtendSim builders and Bayes Net Builders. IDI used this on an Army project using ExtendSim to simulate a diesel generator to test a Bayesian network health monitoring system.

Play VideoThe Critical Importance of Simulation Input Modeling
Presented by Dr. Averill M. Law, President of Averill M. Law & Associates • video length 1:14:16

An important part of any sound simulation study is that of modeling each source of system randomness by an appropriate probability distribution. This SimCast gives examples of data sets from real-world simulation studies, followed by a discussion of two critical pitfalls in simulation input modeling. The two major methods for modeling a source of randomness when corresponding data are available are delineated, namely, fitting a theoretical probability distribution to the data and the use of an empirical distribution. Finally, there is a discussion of how to model a source of system randomness when no data exists.

Play VideoQuality Systems Modeling
Presented by Dr. Al Pugh, Professor Emeritus of Industrial Engineering Technology at Indiana University Purdue University Fort Wayne • video length 48:58

Note: Videos from 2018 and earlier were recorded prior to the release of ExtendSim 10 so use ExtendSim 9. The concepts are the same and ExtendSim 10 can perform all these capabilities in these older videos plus more.